I had some cool 5mm blue and white LEDs that I wanted to swap in. Well I had to do some modifications to the panel because of the 2mm diameter and about 4mm height difference of the new LEDs. After a little drilling I get what you see over to the right. The old LEDs were flush with the surface, these stick out quite a bit. The little "plastic light tubes" that bring the light forward through the door had to be trimmed a little as well to account for the protruding LEDs. It was really nice how well they fit into the little connectors on the back side...didn't have to do any soldering or heatshrink tubing.
